我最近使用 typecraft 的优秀视频系列从 linuxmint 迁移到 archlinux，但在使用 i3-wm 时遇到了问题。我只是想增加 i3 配置中的字体大小，但我无法更新当前设置。即使字体大小增加，使用 mod+shift+r 重新启动配置也不会执行任何操作。我已将 /etc/i3/config 复制到 ~/.config/i3/config 但我仍然无法更改配置文件。
如果我确实对配置文件进行了更改，然后尝试返回到它，我会收到“E325：注意”，然后是“按名称找到交换文件”...
i3配置为默认，如下...
# i3 config file (v4)
#
# Please see https://i3wm.org/docs/userguide.html for a complete reference!
#
# This config file uses keycodes (bindsym) and was written for the QWERTY
# layout.
#
# To get a config file with the same key positions, but for your current
# layout, use the i3-config-wizard
#
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:monospace 8
# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8
# Start XDG autostart .desktop files using dex. See also
# https://wiki.archlinux.org/index.php/XDG_Autostart
exec --no-startup-id dex --autostart --environment i3
# The combination of xss-lock, nm-applet and pactl is a popular choice, so
# they are included here as an example. Modify as you see fit.
# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
# screen before suspend. Use loginctl lock-session to lock your screen.
exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
# NetworkManager is the most popular way to manage wireless networks on Linux,
# and nm-applet is a desktop environment-independent system tray GUI for it.
exec --no-startup-id nm-applet
# Use pactl to adjust volume in PulseAudio.
set $refresh_i3status killall -SIGUSR1 i3status
bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status
bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status
bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
# use these keys for focus, movement, and resize directions when reaching for
# the arrows is not convenient
set $up l
set $down k
set $left j
set $right semicolon
# use Mouse+Mod1 to drag floating windows to their wanted position
floating_modifier Mod1
# move tiling windows via drag & drop by left-clicking into the title bar,
# or left-clicking anywhere into the window while holding the floating modifier.
tiling_drag modifier titlebar
# start a terminal
bindsym Mod1+Return exec i3-sensible-terminal
# kill focused window
bindsym Mod1+Shift+q kill
# start dmenu (a program launcher)
bindsym Mod1+d exec --no-startup-id dmenu_run
# A more modern dmenu replacement is rofi:
# bindsym Mod1+d exec "rofi -modi drun,run -show drun"
# There also is i3-dmenu-desktop which only displays applications shipping a
# .desktop file. It is a wrapper around dmenu, so you need that installed.
# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym Mod1+$left focus left
bindsym Mod1+$down focus down
bindsym Mod1+$up focus up
bindsym Mod1+$right focus right
# alternatively, you can use the cursor keys:
bindsym Mod1+Left focus left
bindsym Mod1+Down focus down
bindsym Mod1+Up focus up
bindsym Mod1+Right focus right
# move focused window
bindsym Mod1+Shift+$left move left
bindsym Mod1+Shift+$down move down
bindsym Mod1+Shift+$up move up
bindsym Mod1+Shift+$right move right
# alternatively, you can use the cursor keys:
bindsym Mod1+Shift+Left move left
bindsym Mod1+Shift+Down move down
bindsym Mod1+Shift+Up move up
bindsym Mod1+Shift+Right move right
# split in horizontal orientation
bindsym Mod1+h split h
# split in vertical orientation
bindsym Mod1+v split v
# enter fullscreen mode for the focused container
bindsym Mod1+f fullscreen toggle
# change container layout (stacked, tabbed, toggle split)
bindsym Mod1+s layout stacking
bindsym Mod1+w layout tabbed
bindsym Mod1+e layout toggle split
# toggle tiling / floating
bindsym Mod1+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym Mod1+space focus mode_toggle
# focus the parent container
bindsym Mod1+a focus parent
# focus the child container
#bindsym Mod1+d focus child
# move the currently focused window to the scratchpad
bindsym Mod1+Shift+minus move scratchpad
# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym Mod1+minus scratchpad show
# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"
# switch to workspace
bindsym Mod1+1 workspace number $ws1
bindsym Mod1+2 workspace number $ws2
bindsym Mod1+3 workspace number $ws3
bindsym Mod1+4 workspace number $ws4
bindsym Mod1+5 workspace number $ws5
bindsym Mod1+6 workspace number $ws6
bindsym Mod1+7 workspace number $ws7
bindsym Mod1+8 workspace number $ws8
bindsym Mod1+9 workspace number $ws9
bindsym Mod1+0 workspace number $ws10
# move focused container to workspace
bindsym Mod1+Shift+1 move container to workspace number $ws1
bindsym Mod1+Shift+2 move container to workspace number $ws2
bindsym Mod1+Shift+3 move container to workspace number $ws3
bindsym Mod1+Shift+4 move container to workspace number $ws4
bindsym Mod1+Shift+5 move container to workspace number $ws5
bindsym Mod1+Shift+6 move container to workspace number $ws6
bindsym Mod1+Shift+7 move container to workspace number $ws7
bindsym Mod1+Shift+8 move container to workspace number $ws8
bindsym Mod1+Shift+9 move container to workspace number $ws9
bindsym Mod1+Shift+0 move container to workspace number $ws10
# reload the configuration file
bindsym Mod1+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym Mod1+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym $left resize shrink width 10 px or 10 ppt
bindsym $down resize grow height 10 px or 10 ppt
bindsym $up resize shrink height 10 px or 10 ppt
bindsym $right resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt
# back to normal: Enter or Escape or Mod1+r
bindsym Return mode "default"
bindsym Escape mode "default"
bindsym Mod1+r mode "default"
}
bindsym Mod1+r mode "resize"
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
status_command i3status
}
#######################################################################
# automatically start i3-config-wizard to offer the user to create a
# keysym-based config which used their favorite modifier (alt or windows)
#
# i3-config-wizard will not launch if there already is a config file
# in ~/.config/i3/config (or $XDG_CONFIG_HOME/i3/config if set) or
# ~/.i3/config.
#
# Please remove the following exec line:
#######################################################################
exec i3-config-wizard
非常感谢任何帮助！再说一遍，我是个新手，如果这是一个非常愚蠢的问题，我深表歉意。
导航至
~/.config/i3/ls -lah.config.swp# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:monospace 8
并将该数字增加到 8。
最后按
mod+shift+r