gstreamer 1.0 rtspsrc到rtph264depay无法链接

Question

我正在尝试使用gstreamer使用以下命令成功连接到泛型相机。

gst-launch-1.0 --gst-debug = 4 rtspsrc location =“ rtsp：//：554 / live / ch00_0”！ rtph264depay！ h264parse！ openh264dec！ d3dvideosink

我看一下调试，它说无法将rtspsrc垫链接到rtph264depay。Picture

但它可以使流正常，并且可以观看视频。当我将其放入c项目时，它说无法将源链接到rtph264parse。我环顾四周，说要使用带有以下代码的动态键盘]

static void on_pad_added (GstElement *element, GstPad *pad, gpointer data)
{
    GstPad *sinkpad;
    GstElement *decoder = (GstElement *) data;
    /* We can now link this pad with the rtsp-decoder sink pad */
    g_print ("Dynamic pad created, linking source/demuxer\n");
    sinkpad = gst_element_get_static_pad (decoder, "sink");
    gst_pad_link (pad, sinkpad);
    gst_object_unref (sinkpad);
}

int main(int argc, char *argv[])
{
   /* Initialize GStreamer */
   gst_init(&argc,&argv);

   /* Build Pipeline */ 
   pipel.pipeline = gst_pipeline_new("My pipeline");
   pipel.source = gst_element_factory_make ("rtspsrc","source");
   g_object_set (G_OBJECT (pipel.source), "latency",2000,NULL);
   pipel.rtppay = gst_element_factory_make( "rtph264depay", "depayl");
   pipel.parse = gst_element_factory_make("h264parse","parse");
   pipel.filter1 = gst_element_factory_make("capsfilter","filter");
   pipel.decodebin = gst_element_factory_make ("openh264dec","decode");
   pipel.sink = gst_element_factory_make("d3dvideosink","sink");

   g_object_set (G_OBJECT (pipel.sink), "sync",FALSE,NULL);

   //create_uri(url,url_size,ip_address,port);
   g_object_set(GST_OBJECT(pipel.source),"location","rtsp://<IP>:554/live/ch00_0",NULL);

   filtercaps = gst_caps_from_string("application/x-rtp");
   g_object_set (G_OBJECT (pipel.filter1), "caps",filtercaps,NULL);

   gst_caps_unref(filtercaps);

   gst_bin_add_many (GST_BIN (pipel.pipeline),pipel.source
                                          ,pipel.rtppay
                                          ,pipel.parse
                                          ,pipel.decodebin
                                          ,pipel.sink
                                          ,NULL);
   if(!gst_element_link(pipel.source,pipel.rtppay))
        printf("\nFailed source to rtppay\n");
   if(!gst_element_link_many(pipel.parse,pipel.decodebin,pipel.sink,NULL))
        printf("\nFailed to link parse to sink");

    g_signal_connect(pipel.rtppay, "pad-added", G_CALLBACK(on_pad_added), pipel.parse);
}

Answer 1

static void cb_new_rtspsrc_pad(GstElement *element,GstPad*pad,gpointer  data)
{
    gchar *name;
    GstCaps * p_caps;
    gchar * description;
    GstElement *p_rtph264depay;

    name = gst_pad_get_name(pad);
    g_print("A new pad %s was created\n", name);

    // here, you would setup a new pad link for the newly created pad
    // sooo, now find that rtph264depay is needed and link them?
    p_caps = gst_pad_get_pad_template_caps (pad);

    description = gst_caps_to_string(p_caps);
    printf("%s\n",p_caps,", ",description,"\n");
    g_free(description);

    p_rtph264depay = GST_ELEMENT(data);

    // try to link the pads then ...
    if(!gst_element_link_pads(element, name, p_rtph264depay, "sink"))
    {
        printf("Failed to link elements 3\n");
    }

    g_free(name);
}

/* ---------- Main --------------- */
int main(int argc, char *argv[])
{
    /* Initialize GStreamer */
    gst_init(&argc,&argv);

    /* Build Pipeline */ 
    pipel.pipeline = gst_pipeline_new("My pipeline");

    creating_pipeline(ip_address,port);

    pipel.source = gst_element_factory_make ("rtspsrc","source");
    g_object_set (G_OBJECT (pipel.source), "latency",2000,NULL);
    pipel.rtppay = gst_element_factory_make( "rtph264depay", "depayl");
    pipel.parse = gst_element_factory_make("h264parse","parse");
    pipel.filter1 = gst_element_factory_make("capsfilter","filter");
    pipel.decodebin = gst_element_factory_make ("openh264dec","decode");
    pipel.sink = gst_element_factory_make("d3dvideosink","sink");

    g_object_set (G_OBJECT (pipel.sink), "sync",FALSE,NULL);

    //create_uri(url,url_size,ip_address,port);
    g_object_set(GST_OBJECT(pipel.source),"location","rtsp://<ip>:554/live/ch00_0",NULL);

    filtercaps = gst_caps_from_string("application/x-rtp");
    g_object_set (G_OBJECT (pipel.filter1), "caps",filtercaps,NULL);

    gst_caps_unref(filtercaps);

    gst_bin_add_many (GST_BIN (pipel.pipeline),pipel.source
            ,pipel.rtppay
            ,NULL);
    // listen for newly created pads
    g_signal_connect(pipel.source, "pad-added", G_CALLBACK(cb_new_rtspsrc_pad),pipel.rtppay);
    gst_bin_add_many (GST_BIN (pipel.pipeline),pipel.parse,NULL);
    if(!gst_element_link(pipel.rtppay,pipel.parse))
        printf("\nNOPE\n");

    gst_bin_add_many (GST_BIN (pipel.pipeline),pipel.decodebin
            ,pipel.sink
            ,NULL);

    if(!gst_element_link_many(pipel.parse,pipel.decodebin,pipel.sink,NULL))
        printf("\nFailed to link parse to sink");

    g_signal_connect(pipel.rtppay, "pad-added", G_CALLBACK(on_pad_added), pipel.parse);
}

现在就工作！

• 使用cb_new_rtspsrc_pad动态添加打击垫
• 将解析添加到bin
• rtppay和解析之间的链接
• 在字符串的其余部分添加必要的元素，以使其正常工作。

Answer 2

您能否将整个代码发布给我们，以了解您的确切项目体系结构？