使用POST方法在Swift中进行HTTP请求

问题描述 投票:149回答:6

我正在尝试在Swift中运行HTTP请求,将POST 2参数发送到URL。

例:

链接:www.thisismylink.com/postName.php

PARAMS:

id = 13
name = Jack

最简单的方法是什么?

我甚至不想阅读回复。我只是想发送它来通过PHP文件对我的数据库进行更改。

post swift parameters http-post httprequest
6个回答
360
投票

在Swift 3及更高版本中,您可以:

let url = URL(string: "http://www.thisismylink.com/postName.php")!
var request = URLRequest(url: url)
request.setValue("application/x-www-form-urlencoded", forHTTPHeaderField: "Content-Type")
request.httpMethod = "POST"
let parameters: [String: Any] = [
    "id": 13,
    "name": "Jack & Jill"
]
request.httpBody = parameters.percentEscaped().data(using: .utf8)

let task = URLSession.shared.dataTask(with: request) { data, response, error in
    guard let data = data, 
        let response = response as? HTTPURLResponse, 
        error == nil else {                                              // check for fundamental networking error
        print("error", error ?? "Unknown error")
        return
    }

    guard (200 ... 299) ~= response.statusCode else {                    // check for http errors
        print("statusCode should be 2xx, but is \(response.statusCode)")
        print("response = \(response)")
        return
    }

    let responseString = String(data: data, encoding: .utf8)
    print("responseString = \(responseString)")
}

task.resume()

哪里:

extension Dictionary {
    func percentEscaped() -> String {
        return map { (key, value) in
            let escapedKey = "\(key)".addingPercentEncoding(withAllowedCharacters: .urlQueryValueAllowed) ?? ""
            let escapedValue = "\(value)".addingPercentEncoding(withAllowedCharacters: .urlQueryValueAllowed) ?? ""
            return escapedKey + "=" + escapedValue
        }
        .joined(separator: "&")
    }
}

extension CharacterSet { 
    static let urlQueryValueAllowed: CharacterSet = {
        let generalDelimitersToEncode = ":#[]@" // does not include "?" or "/" due to RFC 3986 - Section 3.4
        let subDelimitersToEncode = "!$&'()*+,;="

        var allowed = CharacterSet.urlQueryAllowed
        allowed.remove(charactersIn: "\(generalDelimitersToEncode)\(subDelimitersToEncode)")
        return allowed
    }()
}

这将检查基本网络错误以及高级HTTP错误。这也正确地百分比转义查询的参数。

注意,我使用nameJack & Jill来说明x-www-form-urlencoded的正确name=Jack%20%26%20Jill结果,这是“百分比编码”(即空间被%20替换,并且值中的&%26替换)。


有关Swift 2的演绎,请参阅previous revision of this answer


49
投票

Swift 3和swift 4

@IBAction func submitAction(sender: UIButton) {

    //declare parameter as a dictionary which contains string as key and value combination. considering inputs are valid

    let parameters = ["id": 13, "name": "jack"]

    //create the url with URL
    let url = URL(string: "www.thisismylink.com/postName.php")! //change the url

    //create the session object
    let session = URLSession.shared

    //now create the URLRequest object using the url object
    var request = URLRequest(url: url)
    request.httpMethod = "POST" //set http method as POST

    do {
        request.httpBody = try JSONSerialization.data(withJSONObject: parameters, options: .prettyPrinted) // pass dictionary to nsdata object and set it as request body
    } catch let error {
        print(error.localizedDescription)
    }

    request.addValue("application/json", forHTTPHeaderField: "Content-Type")
    request.addValue("application/json", forHTTPHeaderField: "Accept")

    //create dataTask using the session object to send data to the server
    let task = session.dataTask(with: request as URLRequest, completionHandler: { data, response, error in

        guard error == nil else {
            return
        }

        guard let data = data else {
            return
        }

        do {
            //create json object from data
            if let json = try JSONSerialization.jsonObject(with: data, options: .mutableContainers) as? [String: Any] {
                print(json)
                // handle json...
            }
        } catch let error {
            print(error.localizedDescription)
        }
    })
    task.resume()
}

9
投票

下面是我在日志库中使用的方法:https://github.com/goktugyil/QorumLogs

此方法填写Google表单中的html表单。

    var url = NSURL(string: urlstring)

    var request = NSMutableURLRequest(URL: url!)
    request.HTTPMethod = "POST"
    request.setValue("application/x-www-form-urlencoded; charset=utf-8", forHTTPHeaderField: "Content-Type")
    request.HTTPBody = postData.dataUsingEncoding(NSUTF8StringEncoding)
    var connection = NSURLConnection(request: request, delegate: nil, startImmediately: true)

3
投票
@IBAction func btn_LogIn(sender: AnyObject) {

    let request = NSMutableURLRequest(URL: NSURL(string: "http://demo.hackerkernel.com/ios_api/login.php")!)
    request.HTTPMethod = "POST"
    let postString = "email: [email protected] & password: testtest"
    request.HTTPBody = postString.dataUsingEncoding(NSUTF8StringEncoding)
    let task = NSURLSession.sharedSession().dataTaskWithRequest(request){data, response, error in
        guard error == nil && data != nil else{
            print("error")
            return
        }
        if let httpStatus = response as? NSHTTPURLResponse where httpStatus.statusCode != 200{
            print("statusCode should be 200, but is \(httpStatus.statusCode)")
            print("response = \(response)")
        }
        let responseString = String(data: data!, encoding: NSUTF8StringEncoding)
        print("responseString = \(responseString)")
    }
    task.resume()
}

3
投票
let session = URLSession.shared
        let url = "http://...."
        let request = NSMutableURLRequest(url: NSURL(string: url)! as URL)
        request.httpMethod = "POST"
        request.addValue("application/json", forHTTPHeaderField: "Content-Type")
        var params :[String: Any]?
        params = ["Some_ID" : "111", "REQUEST" : "SOME_API_NAME"]
        do{
            request.httpBody = try JSONSerialization.data(withJSONObject: params, options: JSONSerialization.WritingOptions())
            let task = session.dataTask(with: request as URLRequest as URLRequest, completionHandler: {(data, response, error) in
                if let response = response {
                    let nsHTTPResponse = response as! HTTPURLResponse
                    let statusCode = nsHTTPResponse.statusCode
                    print ("status code = \(statusCode)")
                }
                if let error = error {
                    print ("\(error)")
                }
                if let data = data {
                    do{
                        let jsonResponse = try JSONSerialization.jsonObject(with: data, options: JSONSerialization.ReadingOptions())
                        print ("data = \(jsonResponse)")
                    }catch _ {
                        print ("OOps not good JSON formatted response")
                    }
                }
            })
            task.resume()
        }catch _ {
            print ("Oops something happened buddy")
        }

0
投票

这里的所有答案都使用JSON对象。这给我们的Codeigniter控制器的$this->input->post()方法带来了问题。 CI_Controller无法直接读取JSON。我们用这种方法做了没有JSON

fun postRequest(){
//Create url object
guard let url = URL(string: yourURL) else {return}

//Create the session object
let session = URLSession.shared

//Create the URLRequest object using the url object
var request = URLRequest(url: url)

//Set the request method. Important Do not set any other headers, like Content-Type
request.httpMethod = "POST" //set http method as POST

//Set parameters here. Replace with your own.
let postData = "param1_id=param1_value&param2_id=param2_value".data(using: .utf8)
request.httpBody = postData
}

//Create a task using the session object, to run and return completion handler
let webTask = session.dataTask(with: request, completionHandler: {data, response, error in
guard error == nil else {
print(error?.localizedDescription ?? "Response Error")
return
}
guard let serverData = data else {
print("server data error")
return
}
do {
if let requestJson = try JSONSerialization.jsonObject(with: serverData, options: .mutableContainers) as? [String: Any]{
print("Response: \(requestJson)")
}
} catch let responseError {
print("Serialisation in error in creating response body: \(responseError.localizedDescription)")
let message = String(bytes: serverData, encoding: .ascii)
print(message as Any)
}
})
//Run the task
webTask.resume()

现在你的CI_Controller将能够使用param1param2获得$this->input->post('param1')$this->input->post('param2')

© www.soinside.com 2019 - 2024. All rights reserved.